Assembly – Single Speed
The recommended method for running single speed on the Pedälhead involves the Phil Wood
Philcentric Eccentric BB. Note the installation of the Philcentric BB must be done by Guerrilla Gravity or
a qualified bike shop, and requires the Philcentric installation tool.
Follow the instructions from Phil
Wood
, in addition to the below tips.
Note: A half link in the chain may be necessary for some setups
5.
Verify chainline is 55mm upon crank
installation
6.
While adjusting BB position for chain tension,
it can be helpful to slide the drive side hub end
cap forward slightly to install the chain
7.
After the thread locker on the Philcentric is
cured, reapply frame corrosion protection to
the exposed inside of BB shell
Step 5
Step 6
Step 7
