www.guepardnetworks.com
10 |
P a g e
GC1200ac MANUAL
‐
Repeater Mode:
In this mode, the user can access wireless AP, device can be connected to other
wireless network using the wireless. All interfaces are bridged together. Without NAT, firewall and all
network related functions.
Configuration describe on P12, P13, P14, P15 and P16 as below:
Click
Repeater mode
in Wizard, then following page will pop up and choose the right SSID (click
Scan AP
button) to bridge.
Note:
Do not check
WDS pass through
if you do not know this function.
P12. Wireless setting in Repeater Mode
After click
Next
button, then should configure the wireless setting for 5.8GHz band as follow, then click
Next
to finish.
Note:
You should remember GC1200ac allow only one SSID for connecting bridge and another SSIDs (Max
03 SSIDs) for broadcasting to users in the same frequency band (Ex: 2.4GHZ or 5.8GHz). Reset of frequency
band (Ex: 2.4GHZ or 5.8GHz) can create Max 04 SSIDs.
P13. Wireless setting in Repeater Mode
