GUDEL FlexxPump4 D, Руководство по эксплуатации

Страница: 27 / 151

3.2.2 Position of the type plate
The type plate is attached to the right side of the casing. The hydraulic out-
puts are indicated by engraved numbers.
A
B
Fig. 3-2 Position of the type plate
A Type plate
B Number of the hydraulic output
3.3 Technical data
For specific information on the product, refer to the respective drawings as
well as the documentation on the complete system.
Emission sound
pressure level
The emission sound pressure level depends on the machine properties and
the operating conditions. Generally the emissions sound pressure level L
pA
is
≤ 80dB(A), measured at a distance of 1 m from the safety fence and 1.6 m
above ground level. The measurement is performed according to the ISO
11202 standard. The measured value is time-averaged over a machine specific
cycle and offset with correction factors for room and environment noise cor-
rection. The measured value contains measuring uncertainty of +/- 4dB(A)
(accuracy grade 3) and applies for a single machine, measured separately.
Product description
OPERATING MANUAL Lubrication system
FlexxPump4 D
9007202674126091_v2.0_
EN-US
27