Gude Profi 2500, Руководство пользователя

Страница: 8 / 12

GB
8
8. Grinding Depth Delimiter
Some types of saw-chains require that the clamping screw be tilted by 5° - 10° (cf. Table: space Tilt
angle).
Note the notches (Fig.9).
Now, the machine may be switched on and the saw-chain grinding may be started by a careful thrust
on the grinding disk. Adjust the pressure as necessary. Mark the start of grinding e.g. with a piece of
chalk and grind all the teeth in one direction, then turn the clamping screw (mind the angle) and grind
the teeth in opposite direction.
With warn chains, the lateral guide position (Fig.10, position M) shall be set for the grinding disk not
to touch the guide.
Avoid any strong thrust as the teeth might collide and the chain would wear and tear too fast.
Notice : Never grind any driven parts.
obr.9
M
10
Find out in Table (p.9) what is the size of the
depth delimiter back grinding.
Grinding the depth delimiter, the screw clamp
position shall always be 0°.
Set the supporting strut and holder at 90° (Fig.
F).
The grind depth may be set using set screw K.