17
Expert Power Meter
5.4. Default Settings
In order to restore the default settings bootloader mode of
EPM
must be activated (
see 5.1
). Besides that the program
Gbl_Conf.exe
is required.
Run
Gbl_Conf.exe
and select the
EPM
whose settings should
be restored. Then click on
Program Device
g
Reset to Fab de-
fault
.
Please notice that all current settings will be deleted. The default
settings will be loaded when
EPM
’s bootloader mode is deacti-
vated.
5.3 Technical information
Connections:
Ethernet (RJ45)
2 Power Ports (IEC C13, 10A)
EPM Power-inlet (Plug IEC C14, 10A)
Netweork:
10 MBit 10baseT Ethernet
Protocols:
TCP/IP, HTTP, SNMP, Syslog
Power:
230 V, 10A
Temperature:
0°C-50°C
Dimensions:
19“, 1 ru
Default Settings EPM
Name:
EPMeter
IP address:
192.168.0.2
Netmask:
255.255.255.0
Gateway:
192.168.0.0
DHCP:
enabled
Password:
disabled
IP ACL:
disabled
HTTP Port:
80
