Expert
Power
Control NET
8x
8
9
Expert
Power
Control NET
8x
Configuration - IP Address
Hostname
Enter the host name of
EPC
NET 8x
.
EPC NET 8x
uses
this name to connect with
DHCP server.
Special signs may destabi-
lize your network.
IP Address
Here you can change the IP
address of
EPC NET 8x
.
Netmask
Here you can change the netmask of
EPC NET 8x
.
Gateway
Here you can change the standard gateway of
EPC NET 8x
.
Use DHCP
Here you can set, if
EPC NET 8x
shall get its TCP/IP settings
directly from your DHCP server. If DHCP is activated, EPC NET
8x proves if a DHCP server is active inside of your LAN. Then
EPC NET 8x requests TCP/IP settings from this server. If there is
no DHCP server inside of your network, we recommend to deac-
tivate this function.
Figure 6 Configuration - IP Address
