Expert Power Control NET 24x
14
15
Expert Power Control NET 24x
4. Switching
4.1 Switching at the device
EPC NET 24x
disposes of two buttons:
“select”
and
“ok”
. By
pushing
“select”
, the LED of Power Port 1 starts blinking which
means that it is selected. By pushing the button again, the next
Power Port is selected. If you want to change the switching
state of the selected Power Port, push the
“ok”
button for two
seconds.
You can check the status of the Power Ports by the color of the
Power Port status LED (green=enabled/red=disabled).
4.2 Switching by Webinterface
Go to the website of
EPC NET 24x
. Enter the IP address of
EPC
NET 24x
into the address line of your internet browser:
http://IP address of
EPC NET 24x
/
Figure 11 Buttons
Figure 12 Login
