Gude Expert PDU basic 8110, Руководство пользователя

Страница: 6 / 18

6
Expert PDU basic 8110/8111 Configuration
4 Configuration
4.1
DHCP
After switch-on Expert PDU basic 8110/8111 looks for a DHCP server and requests an available IP address .
Please check the IP address allocated to Expert PDU basic 8110/8111 in the DHCP server settings to make sure that the
same address is used at every reboot.
4.2
Network settings with GBL_Conf
For changing the network properties manually, the program GBL_Conf.exe is required. This tool is available for free on our
website www.gude.info.
Furthermore GBL_Conf.exe enables you to install firmware updates and to reset Expert PDU basic 8110/8111 to its factory
settings.
Activate bootloader mode of Expert PDU basic 8110/8111 and run GBL_Conf.exe. The program will look automatically for
connected devices and will display their network configuration.
If the displayed IP address accords with the factory settings (192.168.0.2), there is either no DHCP server available in the
network or no free IP address could be allocated.
Enter a free IP address and the according netmask in the entry mask, then save these changes by clicking on Program
Device SaveConfig.
Restart the firmware of Expert PDU basic 8110/8111, so that the changes will take effect. Now click on Search in order to
have the new network configuration displayed.
4.3
Configuration via webinterface
Go to the website of Expert PDU basic 8110/8111. Enter the IP address of Expert PDU basic 8110/8111 into the address
line of your internet browser:
http://”IP address of Expert PDU basic 8110/8111”/
and press LOGIN.
To enter the configuration menu, click on „Configuration“ on the upper left side of the screen.