2. Insert the hold-in stud through
in front of the cross member.
3. Adjust the grabs to correspond to the wood piece diameter.
4. Secure the hold-in stud bottom with a
cotter pin included in the delivery.
Cleaving Cross Assembly
6. Screw the holding screw in the cross up to the half .
2. Screw on the nut included from
outside.
3. Fit the cleaving cross on a screw the
holding screw in the knife
recess until the nut fits on tightly.
4. Adjust the screw and the nut for
the cleaving cross to get pushed
completely up.
3
2
2a
4
3
4
1
2
15
