Gude 94066, Оригинальная инструкция по эксплуатации

Страница: 8 / 42

Introduction
To enjoy your new GBS 80 DRILL GRINDER as long as
possible, please read carefully the Operating Instructions
and the attached safety instructions before putting the
appliance into operation. We also recommend keeping the
Operating Instructions for future reference. Making
technical changes to improve the appliance as part of the
continuous product development reserved. This document
represents the original Operating Instructions.
Supply of GBS 80 drill grinder includes
1. GBS 80 drill grinder
2. Original Operating Instructions
3. Warranty
certificate
GBS 80 drill grinder parts (pic. 1)
1. Grinding
hole
2. Alignment hole
3. Alignment button
4. Chuck
5. Chuck
holder
6. Tip shaping hole
7. On/Off
8. Wheel protective cover
9. Appliance
protection
GBS 80 drill grinder technical specifications
Connection: 230V~50
Hz
Engine output: 80 W / S3 20%
Protection class: I
Protection type: IP20
Revolutions: 4,200
-1
Drill diameter: 3 x - 13 mm
Tip angle: 118°
Noise: Lwa 96 dB
Weight: 2.43 kg
General safety instructions
When using electric units, basic safety regulations
must be followed to prevent a risk of fire, electric
shock and injury of persons:
Before putting the appliance into operation, please read
and follow all these instructions.
Keep the safety instructions for future reference!
Keep the place of your work clean!
Mess in the place of your work may result in injuries.
Consider the environment
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide adequate lighting.
Do not use the appliance near flammable liquids or gases.
Protect yourself against electric shock!
Avoid contact with grounded parts.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
appliance and cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
An appliance that is not used should be kept in a dry,
locked place inapproachable to children.
Do not overload your appliance!
Works better and safer in the specified output range.
Use the right appliance!
Do not use an appliance with low output for heavy works.
Do not use the appliance for purposes for which it has not
been designed.
Wear adequate working clothes!
Do not wear loose clothes or jewels as they could get
caught by movable parts.
Shoes with an anti-slip sole for working outdoors are
recommended. Wear a hairnet if you have long hair.
Use protective aids!
Protective glasses to be worn at all times.
Use a breathing mask for dusty works.
Do not use the cable for purposes for which it has not
been designed!
Do not use the cable to unplug the appliance. Protect it
against excess temperatures and sharp edges.
Secure the processed material!
To secure the processed material, use a clamping device
or a vice. In this way, the material will be secured better
than manually.
Avoid any abnormal posture!
Provide stability to keep balance at all times.
Look after your appliance!
Keep the appliance sharp and clean. It will work better and
safer.
Follow the servicing regulations and tools replacement
instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
Check regularly the extension cables and have them
replaced if damaged.
Keep handles clean, with no signs of oil and fat.
Unplug the appliance!
When the appliance is not being used, before any
servicing or replacement of e.g. the abrasive wheel.
Do not let any inserted tools in the appliance!
Check whether all wrenches and adjustment tools are
removed before starting the appliance.
Prevent unintentional appliance starting!
Make sure the switch is in the “off“ position when plugging
the appliance.
Extension cable for outdoor use:
Only approved extension cables with appropriate marking
to be used outdoors.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
Check whether the appliance is not damaged!
Protective equipment and slightly damaged parts need to
be checked whether still working properly before using the
appliance the next time.
Check whether movable parts work perfectly and are not
jammed or damaged. All parts must be fitted properly and
meet all conditions to make sure the appliance works
perfectly. Any damaged protective equipment and parts
must be repaired or replaced in an authorised shop, unless
otherwise specified in the Operating Instructions.
Have any damaged switches replaced in a service
workshop.
Do not use appliances with defective On/Off.
8