Gucci Dive watches, Инструкция по эксплуатации

Страница: 9 / 13

9
Automatic watches draw their energy from an oscillating weight activated
by the natural movements of your wrist. This winds the watch.
The minimum power reserve is 46 hours. If the watch has stopped (e.g. if it
has not been worn for a long time or in case of limited activity), it must be
wound manually – unlock the screwed crown by turning it anti-clockwise to
position I, and rotate the crown a few times clockwise. Then press the crown
in while simultaneously turning it clockwise to screw it back into position 0.
Note: the accuracy of the time is influenced by how the watch is worn.
Normal running position: crown in position 0, screwed against the case.
Correcting the date: unscrew the crown and pull it out to position II. Turn it
clockwise until the desired date is displayed.
Push the crown back into position I and screw it back into position 0.
During this operation, your watch will keep running, so the time does not
need to be corrected.
Setting the watch time: unscrew and pull out the crown to position III, the
second hand will stop. Turn the crown clockwise or anti-clockwise to the
desired time.
Push the crown back into position I and screw it back into position 0.
After any setting, be sure to screw the crown carefully back into position 0
to keep your watch water resistant.