69-20-006-03
Howard Sconce Wall Lamp
Assembly Instructions.
ASSEMBLY INSTRUCTIONS
fo
r
Howard Sconce Wall Lamp
For enquiries contact GUBI A/S - CVR: 17940384
Klubiensvej 7-9. 2150 Nordhavn. Copenhagen, Denmark
T +45 69 15 60 60 – [email protected]
GUBI.COM
C A R E I N S T R U C T I O N S
T R O U B L E S H O O T I N G
Wipe with a dry cloth or a damp cloth soaked in warm water.
Use only soft cloth for wiping and polishing, never sponges
or steel wool. Do not use abrasive household cleaners. Do
not use acidic or alkaline cleaning materials, glass cleaner or
household ammonia.
If lamp does not light, turn off the power. Check the bulb for a broken
filament. Replace bulb if necessary, then turn it on. If the lamp still
does not light, please contact customer service at the local dealer. If
the external flexible cable or cord of this lamp is damaged, it must be
replaced by a qualified electrician in order to avoid a hazard.
T E C H N I C A L I N F O R M A T I O N
Recommended light source:
2 x E14, 450lm ~ 3-5W LED. Only dimmable light bulbs work
properly. Turn power off when changing light bulb. Isolation class
II.
The lamp is not approved for outdoor use or use in damp/wet
rooms (IP20).
