Guardian Telecom Inc.
Installation and Operation
Model WRT
Page 10
Programming The WRT-20 With Membrane Keypad
A direct memory access register can be assigned to each of the 10 number
keys.
Tip: You can store up to
10 numbers in memory.
Each direct memory access register can contain up to 20 characters.
•
Lift the telephone handset off the hook.
Tip: Valid characters are
0-9, *, # and Pause.
•
Press
Program
to put the phone into programming mode.
•
Press
Memory
.
•
Press a number key
0-9
.
•
Enter the telephone number you want to store. Valid entries are
0-9
,
*
,
#
,
and
Pause
(e.g., 1-800-363-8010).
Tip: The number
selected is assigned to
the access register.
•
If your phone requires you to dial 9 – or other digit – to access an outside
line, press the appropriate key, then the
Pause
key, then enter the
telephone number you want to store.
•
Press
Program
again to leave programming mode and return to normal
telephone operation.
Operating the WRT
Manual Operation:
•
Lift the handset and dial manually.
Tip: Valid keys for
manual dialing are 0-9, *
and #.
Automatic Memory Dialing For The WRT-20 With Membrane Keypad
•
Lift the handset.
•
Press
Memory
.
Tip: Program the WRT-
20 to use this quick
dialing method.
•
Press a number key
0-9
.
•
The number stored in the register will automatically dial.
