Guardian Telecom Inc.
Setup & Configuration
VoIP Telephones
5. Getting Started
The Installation manual provided with the telephone provides information on installing and connecting the device to the server.
This manual describes the steps required to customize the telephone to suit the individual’s preferences.
The Discovery Utility is supplied on a CD and needs to be installed manually.
To access a VoIP phone for programming:
•
Install the Guardian Discovery Utility onto the network server or SIP server.
•
Start the Utility by double clicking the icon.
•
Click on “Refresh List”.
•
Click on the device to be programmed to highlight it.
•
Click on “Launch Browser”.
Figure 2 - Startup Screen
6. Configure the Telephone Parameters
To configure the Telephone online use a standard web browser.
All Telephones are initially configured with the following default IP settings:
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
Table 1 - Factory Default Settings
a. Default if there is not a DHCP server present.
When configuring more than one Telephone attach the Telephones to the network and configure one at a time to avoid IP
address conflicts.
Page 8
