G
uar
di
an
F
al
l P
ro
te
ct
io
n
63
05
S
. 2
31
st
St
.,
Ken
t,
W
A
9
80
32
4
Installation and Use
1. Inspect Guardian Non-Shock Absorbing Lanyards and all PFAS equipment to be used in combination with
Non-Shock Absorbing Lanyards.
2. Ensure that all connectors and all other components of the PFAS are compatible with Guardian Non-Shock
Absorbing Lanyards, and are selected by a Competent Person. The selected safety harness MUST be of proper
size, and MUST be fitted snugly, but still allow for a full range of movement.
3. Make considerations for eliminating or minimizing swing fall hazards.
4. Ensure structure to which the anchorage connector is attached is capable of withstanding a MINIMUM load
relative to the application with which the Non-Shock Absorbing Lanyard is to be used.
5. Attach lanyard snap hook, carabiner, or web loop (as applicable) to compatible harness D-ring. If using in
combination with shock absorber extension, ALWAYS locate the shock absorber end at the applicable harness
D-ring. The shock absorber MUST NEVER be located at the anchorage connector.
6. Attach remaining snap hook or carabiner end of lanyard to compatible anchorage connector. Rebar Hooks
MUST ONLY be connected to structural rebar. Ensure that all connectors are self-closing and self-locking, and
that there is no risk of roll-out.
7. NEVER work with employed harness D-ring positioned above the anchorage connector, unless permitted by
specific application or combination of equipment. A Competent Person must make a determination regarding
the acceptability of working above an anchorage connector.
8. Only use Guardian Lanyards in the fall protection application(s) for which they are designed. Refer to
product labeling, or contact Guardian Fall Protection if unsure of proper application(s).
NEVER use Non-Shock Lanyards for material handling.
!
WARNING
