Labels
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
12
MADE IN U.S.A.
OSHA 1926.502, 1910.66
Z359.1-2007, A10.32-2012
Date of First Use
J F M
A
A
J
M J
S O N D
YR
YR
YR
YR
YR
CUSTOM
10917
GAL
10937
SS
50’; 3/16” CABLE
10918
GAL
10938
SS
65’; 3/16” CABLE
Serial #
Mfg. Date
MK
ED
GE
SE
RIES RETRA
CTA
BLE
WARNING:
Manufacturer’s instructions supplied with this
product at time of shipment must be followed
for proper use, maintenance and inspection.
Alterations or misuse of this product, or
failure to follow the instructions, may
result in serious injury or death.
DO NOT ATTEMPT TO SELF
SERVICE OR REPAIR. DO NOT
REMOVE THIS LABEL.
USE:
Always use in accordance
with manufacturer’s instruction
manual and labels included with
this device at the time of
shipment. This device is only
for use by one person as a fall
arrester. Always connect the
snap hook directly to the
attachment point on the safety
harness. Guard against swing-falls
by keeping the lifeline vertically
overhead. Never work above the
device. Do not allow lifeline to
become slack. Always maintain
tension while letting the device
retract after disconnecting from
worker. Do not allow lifeline to come
in contact with anything that will
damage it, including, but not limited to,
sharp edges, rough or high temperature surfaces,
welding, heat sources, electrical hazards, or moving
machinery. Ensure that connection to anchorage is secured
properly before use. This unit is for use by trained persons
only. See user manual for more details.
SPECIFICATIONS:
Maximum arresting distance: 54 in.
Average arresting force: 900 lbs.
Capacity range: 130 – 310 lbs., or up to 420 lbs.*
INSPECTION:
Inspect unit in accordance with the
manufacturer’s instruction manual and regulatory
guidelines. Before use, inspect for any
signs of damage, wear, or
malfunctioning components. Check
lifeline retraction by pulling out a
minimum 4 ft. of lifeline and allowing
it to retract under light tension;
lifeline should retract completely.
Pull sharply to test locking
function; brakes must engage.
Before use, inspect the lifeline
condition, function and condition
of fasteners, and legibility of
labels. Also, check for evidence
of defects, damage, or missing
parts. Depending on model, user
must inspect the shock pack for
signs of deployment, or impact
indicator for signs of activation.
Device must be taken out of
service for inspection and
recertification after arresting a fall,
or if either the shock pack or
impact indicator (depending on
model) show signs of activation. Do
not use if inspection reveals an unsafe
condition. Unit must be inspected by a
trained and competent person at least every
6 months.
*For capacities between 311-420 lbs., or use over a leading
edge, user MUST attach a Guardian 01205 shock
absorbing lanyard to the snap hook of this unit. The
snap hook of the 01205 MUST be attached to the
dorsal D-ring on the harness of the user.
90129 (Rev. B)
MK ED
GE SERIES RETRACTA
BLE
GUARDIAN FALL PROTECTION
800.466.6385
www.guardianfall.com
