REPLACING THE UV-C BULB
WARNING
ULTRAVIOLET-C LIGHT IS EMITTED FROM THE BULB WHEN THE UNIT IS ELECTRIFIED, EYE INJURY OR IRRITATION COULD RESULT, UNPLUG THE UNIT WHEN
SERVICING THE BULB TO AVOID OVER EXPOSURE OF EYES AND SKIN TO THE ULTRAVIOLET-C LIGHT.
Discard the used bulb by following the recommended disposal procedure for a used fluorescent bulb.
The bulb should only be used in the Germ Guardian GG1100 and all instructions for use must be followed.
WARNING
MISAPPLYING OR MISUSING THE UV-C BULB COULD CAUSE INJURY TO THE EYES OR SKIN. NEVER USE THE BULB WITHOUT INSTALLING IT IN THE UNIT AS
INSTRUCTED. NEVER OPERATE THE UNIT WITHOUT THE TOP CAP IN PLACE.
This product can be serviced or maintained only by changing the UV-C bulb. The unit contains no serviceable parts. All parts, except the UV-C bulb, are
warranted for 1 year from date of purchase. See the Limited Warranty. Use of any bulb other than the appropriate Guardian Technologies pluggable bulb will void
the warranty.
You may purchase bulbs directly from Guardian Technologies, or we can provide the names of retailers who stock our products in your area.
Please call 866-603-5900 for more information.
The health aspects associated with this product and its ability to aid in the disinfection of environmental air have not been investigated by CSA.
The purchase of the Germ Guardian device does not prevent illness.
IMPORTANT
The UV-C bulb is specifically excluded from this warranty. Use only a Guardian Technologies replacement bulb.
The air sanitizer contains no serviceable parts. Due to the unique technology of the product, all repairs must be performed by Guardian Technologies authorized
service centers. Any unauthorized repair or tampering with the product VOIDS this warranty. This warranty does not cover misuse or abuse.
LIMITED WARRANTY
To the consumer, Guardian Technologies LLC warrants this product to be free of defects in materials or workmanship commencing upon the date of the original purchase. Save your
original sales receipt to validate start of warranty period. Warranty is not valid without receipt.
If this product should become defective within the warranty period, we will repair or replace any defective parts free of charge. All warranty repairs must be completed by Guardian
Technologies LLC. This warranty
does not cover unauthorized repairs.
The warranty does not include unusual wear, damage resulting from accident, or unreasonable use of
the product. This warranty only covers the product when used with genuine Guardian Technologies accessories. This warranty covers product that was purchased from authorized
distributors. This warranty gives you specific legal rights and you may also have other rights (other rights may vary from state to state in the U.S.A.)
The product warranty registration can be completed online at www.guardiantechnologies.com.
We consider the registration process important to ensuring superior
service to our customers, however submitting the warranty registration is optional and does not affect your rights to utilize this warranty according to the conditions stated above.
To submit product under warranty the complete machine must be delivered pre-paid to Guardian Technologies LLC. Please include complete information including: the problem, the
model number of the product, the day of purchase, and a copy of the original sales receipt along with your name, address, and telephone (email optional). Address returns to the
attention of: Customer Service, at the address below. Additional questions or comments can be made toll free to the number listed below.
Guardian Technologies LLC
26251 Bluestone Blvd. | Euclid, Ohio 44132
1.866.603.5900 | www.guardiantechnologies.com
This warranty can be registered online at www.guardiantechnologies.com.
Additional copies of the instruction manual can be obtained by accessing and
printing directly from our website or calling customer service.
Guardian Technologies LLC
26251 Bluestone Blvd. | Euclid, Ohio 44132
1.866.603.5900 | www.guardiantechnologies.com
1. Unplug the unit from
the electrical outlet.
2. Using a small Phillips
head screwdriver,
loosen and remove the
Phillips screw located
at the top backside of
the unit.
3. Remove the top cap by
lifting it off of the top
of the unit.
4. Hold the unit in place
with one hand. Locate
the bulb and reach into
the cylinder.
5. With your opposite
hand. Turn the bulb in
a counter clockwise
position (left) to loosen
from the socket.
6. Take new bulb and
screw into unit using a
clockwise motion.
7. Reassemble by
reversing steps 1-6.
©
2007 Guardian Technologies LLC
