Guardian FMS 65 Series, Руководство пользователя

Страница: 19 / 28

10-3 Rev. A
2018-11-7
13.0 Bluetooth Connectivity
FMS 65X and 85X incorporates a Bluetooth chip that can integrate with any electronic
device that supports Bluetooth. Once paired with such a device such as an iPhone or the
iPad, the unit will connect automatically everytime the unit is powerd up.
If the paired device has the optional Pilot FMS App loaded then data from the RS232
data buss can be displayed on the iPhone/ iPad and be transferred to the cloud for secure
storage. Real time engine data, flight information, CO levels, GPS data and the pilot and
airframe logbook can all be managed from the App.
If the unit is not being detected by the Bluetooth of your
iPhone/iPad, go to Bluetooth setting on iPhone/iPad, select
'forget this device' and try to reconnect again.
Maintenance Instructions
The CO Detector unit has its own internal built in test mechanism and every time it is
powered up, it conducts a self diagnostic test. In case the device fails the test, this is
indicated by the warning lamp blinking red after the equipment is switched ON. If the
equipment clears the built in test the warning lamp will stay green.
Field repairs are permissible on all components of the CO Detector except on the
CO Detecting element and its indicator. In case these components are found faulty,
the unit must be returned to CO Guardian, LLC for service / repair .
The aircraft wiring harness, circuit breaker, alert annunciation, and Test/Reset switch
shall be included in the aircraft maintenance instructions for general visual inspections
for system integrity, installation security, corrosion and chaffing.
14.0 Scheduled Maintenance
The following scheduled maintenance program tasks are to be added to the aircraft
operator’s airplane maintenance program -