Guardian FA148CP Скачать руководство пользователя страница 54

– 54 –

/,0,7$7,2162)7+,66<67(0

WARNING!    THE LIMITATIONS OF THIS ALARM SYSTEM

While this system is an advanced design security system, it does not offer guaranteed protection against burglary or other
emergency.  Any  alarm  system,  whether  commercial  or  residential,  is  subject  to  compromise  or  failure  to  warn  for  a
variety of reasons. For example:

Intruders  may  gain  access  through  unprotected  openings  or  have  the  technical  sophistication  to  bypass  an  alarm
sensor or disconnect an alarm warning device.

Intrusion  detectors (e.g. passive infrared detectors), smoke detectors,  and many  other  sensing  devices  will  not  work
without power. Battery operated devices will  not work without batteries,  with  dead  batteries, or if the batteries are
not  put  in  properly.  Devices  powered  solely  by  AC  will  not  work  if  their  AC  power  supply  is  cut  off  for  any  reason,
however briefly.

Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm receiver. Even
if the signal path has been recently checked during a weekly test, blockage can occur if a metal object is moved into
the path.

A user may not be able to reach a panic or emergency button quickly enough.

While smoke detectors have played a key role in reducing residential fire deaths in the United States, they may not
activate or provide early warning for a variety of reasons in as many as 35% of all fires, according to data published
by the Federal Emergency Management Agency. Some of the reasons smoke detectors  used in conjunction  with this
System  may  not  work  are  as  follows.  Smoke  detectors  may  have  been  improperly  installed  and  positioned.  Smoke
detectors  may  not  sense  fires  that  start  where  smoke  cannot  reach  the  detectors,  such  as  in  chimneys,  in  walls,  or
roofs, or on the other side of closed doors. Smoke detectors also may not sense a fire on another level of a residence or
building. A second floor detector, for example, may not sense a first floor or basement fire. Moreover, smoke detectors
have  sensing  limitations.  No  smoke  detector  can  sense  every  kind  of  fire  every  time.  In  general,  detectors  may  not
always warn about fires caused by carelessness and safety hazards like smoking in bed, violent explosions, escaping
gas, improper storage of flammable materials, overloaded electrical circuits, children playing with matches, or arson.
Depending upon the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates as
anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or death.

Passive  Infrared  Motion  Detectors  can  only  detect  intrusion  within  the  designed  ranges  as  diagrammed  in  their
installation  manual.  Passive  Infrared  Detectors  do  not  provide  volumetric  area  protection.  They  do  create  multiple
beams of protection, and intrusion can only be detected in  unobstructed areas covered  by those beams. They cannot
detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or
windows.
Mechanical  tampering,  masking,  painting  or  spraying  of  any  material  on  the  mirrors,  windows  or  any  part  of  the
optical system can reduce their detection ability. Passive Infrared Detectors sense changes in temperature; however,
as  the  ambient  temperature  of  protected  area  approaches  the  temperature  range  of  90°  to  105°F,  the  detection
performance can decrease.

Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on
the other side of closed or  partly open doors. If warning devices sound on a different level  of the residence from the
bedrooms, then they are less likely to waken or alert people inside the bedrooms. Even persons who are  awake may
not  hear  the  warning  if  the  alarm  is  muffled  from  a  stereo,  radio,  air  conditioner  or  other  appliance,  or  by  passing
traffic. Finally, alarm warning devices, however loud, may not warn hearing-impaired people or waken deep sleepers.

Telephone  lines  needed  to  transmit  alarm  signals  from  a  premises  to  a  central  monitoring  station  may  be  out  of
service or temporarily out of service. Telephone lines are also subject to compromise by sophisticated intruders.

Even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect
themselves  from  the  emergency  situation.  In  the  case  of  a  monitored  alarm  system,  authorities  may  not  respond
appropriately.

This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed
to last as long as 10 years, the electronic components could fail at any time.

The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance.
This alarm system should be tested weekly to make sure all sensors and transmitters are working properly.
Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is not a substitute for
insurance.  Homeowners,  property  owners  and  renters  should  continue  to  act  prudently  in  protecting  themselves  and
continue to insure their lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and their loved
ones to learn about these developments.

Содержание FA148CP

























































Отзывы: