Guardall GCD, Руководство по установке

Страница: 2 / 13

2 / 13 P/N MAINST-GUARDALLPIR
• REV 1.0 • ISS 15MAR21
Avoid common false alert causes
Ensure the devices
field of view is not obstructed
Install on a flat stable surface only
Ensure surrounding structures are stable
For internal use only
Screws & Fixing
A minimum of 2 opposing fixing holes should be used to
ensure maximum stability. When corner mounting care
should be taken to ensure the chassis is not twisted, if the
corner is uneven then two fixings on the same side would be
acceptable. Where removal from mounting detection is
required you must ensure that the tamper fixing is opposite
to at leas
t one of the corner or wall fixings.
Dependent on the mounting substrate, suitable fixings may
be required. The size and type will depend on the choice of
fixing screw.
•
Minimum screw size 3.5 X 16mm CSK
•
Maximum screw size 4.0 X 70mm CSK