Guarda FTR095 Скачать руководство пользователя страница 23

English –

23

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND 

OBLIGATIONS

The EPA (The US Environmental Protection Agency), 

Environment Canada and GUARDA Systems are 

pleased to explain the emissions control system 

warranty on your 2009 and later small nonroad engine. 

In U.S. and Canada, new small nonroad engines 

must be designed, built and equipped to meet the federal 

stringent anti-smog standards. GUARDA Systems

must warrant the emission control system on 

your small nonroad engine for the period of time listed 

below provided there has been no abuse, neglect or 

improper maintenance of your unit. Your emmission 

control system includes Parts such as the carburetor and 

the ignition system. Where a warrantable condition exists, 

GUARDA Systems will repair your small nonroad engine

at no cost to you. Expenses covered under warranty 

include diagnosis, parts and labor.

MANUFACTURER

′′

S WARRANTY 

COVERAGE

The 2009 and later small nonroad engines are warranted 

for two years. If any emission related part on you engine 

(as listed above) is defective, the part will be repaired or 

replaced by GUARDA Systems.

OWNER

′′

S WARRANTY 

RESPONSIBILITIES

As the small nonroad engine owner, you are responsible 

for the performance of the required maintenance listed in 

your Operator

s Manual. GUARDA Systems recommends 

that you retain all receipts covering  maintenance  on  small 

nonroad engine, but GUARDA Systems cannot deny 

warranty solely for the lack of receipts or for your failure 

to ensure the performance of all scheduled maintenance. 

As the small nonroad engine owner, you should, however, 

be aware that GUARDA Systems may deny you warranty 

coverage if your small nonroad engine or a part of it has 

failed due to abuse, neglect, improper maintenance, 

unapprov

ed modifications or the use of 

parts not made 

or approved by the original equipment manufacturer. 

You are responsible for presenting your small nonroad 

engine to a authorized servicing dealer as soon as a 

problem exists. The warranty repairs should be completed 

in a reasonable amount of time, not to exceed 30 days. If 

you have any questions regarding your warranty rights 

and responsibilities, you should contact your nearest 

authorized servicing dealer or call GUARDA Systems,

at +61893991644 or www.guardasystems.com .

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date the small nonroad 

engine is delivered.

LENGTH OF COVERAGE

GUARDA Systems warrants to the initial owner 

and each subsequent purchaser that the engine is 

free from defects in materials and workmanship which 

cause the failure of a warranted part for a period of two 

years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS  Repair or 

replacement of any warranted part will be performed at no 

charge to the owner at an approved 

servicing dealer. If you have any 

questions regarding your warranty rights and 

responsibilities, you should contact your nearest 

authorized servicing dealer or call GUARDA Systems,

at +61893991644 or www.guardasystems.com .

WARRANTY PERIOD

 Any warranted part which is not 

scheduled for replacement as required maintenance, or 

which is scheduled only for regular inspection to the effect 

of “repair or replace as necessary” shall be warranted for 

2 years. Any warranted part which is scheduled for 

replacement as required maintenance shall be warranted 

for the per

iod of time up to the first scheduled 

replacement point for that part.

DIAGNOSIS

 The owner shall not be charged for 

diagnostic labor which leads to the determination that a 

warranted part is defective, if the diagnostic work is 

performed at an approved servicing dealer.

CONSEQUENTIAL DAMAGES

GUARDA Systems

may be liable for damages to other engine 

components caused by the failure of a warranted part still 

under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper 

maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified pa

rts can be grounds for 

disallowing a warranty claim. GUARDA Systems

is not liable to cover failures of warranted parts 

caused b

y the use of add-on or modified pa

rts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights 

and responsibilities, you should contact your nearest 

authorized servicing dealer or call GUARDA Systems,

at +61893991644 or www.guardasystems.com .

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all 

authorized servicing dealers.

Содержание FTR095


























Отзывы: