Index:
GENERAL OPERATION INSTRUCTIONS
1. INTRODUCTION ..............................................................................2
2. SAFETY MANAGEMENT PROCEDURES.............................2 - 3
3. UNPACKING AND SETTING UP....................................................4
4. EMPTYING THE TANK AFTER DRY VACUUMING....................5
5. EMPTYING THE TANK AFTER WET VACUUMING...................6
6. CLEANING THE FLOAT....................................................................6
7. MAINTENANCE.................................................................................6
8. DAILY CHECKS OR AT EACH USE................................................6
9. 1000 HOUR OR 3 MONTHLY CHECK.........................................7
10. TROUBLE SHOOTING ..................................................................7
11. SET UP FOR USE WITH EDGE POWERCUTTER.....................9
12. HOW IT WORKS WITH EDGE POWER CUTTER...................10
1. INTRODUCTION
Your new Guarda Exhaust Vacuum is designed specifically with an exhaust port so that it can be used as
part of a system with the Guarda Saws and other equipment which are engineered to remove fumes,
slurry and dust. The Guarda Exhaust Vacuum also comes with a full range of accessories designed to
make your cleaning task an easy one. To get the best from your machine we suggest you follow the
operating and maintenance instructions contained in this document.
2. SAFETY MANAGEMENT PROCEDURES
These instructions must be read and adhered to before operating this machine. Failure to do so may
result in injury to the operator, nearby persons, or damage to property, or to this machine.
page 2
The packaging around the cleaner (plastic bags, clips, ties etc.) pose a choking hazard and
should be kept out of the reach of children and animals.
This machine is designed to be used by trained & competent adults. It is not to be used by
children or individuals incapable of using it safely. If used incorrectly, it can be harmful.
The end of the suction hose or blow hose and/or the accessories must be kept away from your
face and the faces of others at all times during operation as the suction or blow created can
cause damage to the eyes, ears and mouth.
Do not use adapters or multiple sockets, without knowing the electrical input of each.
If any electrical extension is used, check that it corresponds to the power requirements of the
machine and that the connection of the plug with the socket is compliant and sealed.
Take care of the electrical cable, it must be protected from water, breaks & tears and chemical
agents. Do not repair the cable in case of breaks & tears, but replace it with a new one. The
cable must be replaced by the manufacturer or its service agent or a similarly qualified person
in order to avoid further hazard.
DO NOT pull the cable to drag the machine into position or to remove the plug from the
socket.
}
GENERAL USE VACUUMING
FOR USE WITH GUARDA
EDGE POWER CUTTER
