Installing battery
Correct placement of battery
2.
Place the Mobile1 in a free and open space with a clear view of the sky. Situate the
antenna in a location perpendicular to the ground. This may be accomplished by standing the
device upright on a surface, or by wearing the device as intended while standing. The Mobile1
unit must prelock onto available GPS signals prior to use. Limit movement of the Mobile1 for
10-15 minutes to ensure the lock is complete.
3.
Remove the battery within an hour of completing an event or training session.
Note: The GPS satellite constellation does not provide a signal sufficient to support indoor use.
The Mobile1 is designed to provide the best GPS performance possible for a belt worn device
and in some cases may work indoors but is not guaranteed to do so. For best results the Mobile1
should be used in areas with a clear view of the sky.
Charging the battery
1. Remove the battery from the Mobile1.
2. Match the battery contacts with the charger connectors, then slide the battery contacts first,
with the silver label facing up, into the charging sled.
3
Содержание Mobile1
Страница 7: ...7 ...