INSTALLATION MANUAL
EN
GTV, ul. Przejazdowa 21, 05-800 Pruszków, tel. 22 444 75 00, fax 22 444 75 03, www.gtv.com.pl
Isolated IR switch controller with flexible IR sensor detector.
Model: AE-WBEZDB-10S, AE-WBEZDC-10S
1. Technical data:
Input: AC220-240V/50-60Hz
Max.500W(AC220-240V)
Max.200W (AC220-240V)
Sensor: 2m kabel with IR sensor
Max sensor detection: 5-6cm
2. Mounting schematics
Fig 1
Drilling a hole of O13mm at desired position and mount the IR-Sensor detector as shown on figure 2 on the left, and connect the plug to the controller
Fig. 2
Attention:
Permanent mains connection must be undertaken only by a qualified specialist.
Make sure to connect HZK218B only to properly installed mains. Cut connection to the mains during assembly.
Keep clean of IR-sensordetectorto avoid the unwanted action of the sensor.
Make sure that IR-sensor is fixed to the drilling hole, otherwise its function can be affected.
The IR-sensor reacts on short approaches of objects(newspapers) or human hands. The IR sensor controller switches on (off)“ when it detects the object
within its detecting range and switches on when it stitches off(undetects)* the object within its detecting range .
Keep away any waving objects within the detection area to avoid the unwanted action of the controller.
*Depends on the model
The company does not accept responsibility for damages caused by incorrect use or faulty combination of element.
INPUT
OUTPUT
SENSOR
EMC Directive (2004/108/EC) and LVD (2006/95/EC)
Our products meet all requirements of the following Community Directives and domestic regulations that implement the Directives: Electromagnetic Compatibility (EMC) EMC 2004/108/EC; Low Voltage (LVD)
2006/95/EC. The Low-Voltage Directive applies to electrical equipment intended for operation at the nominal voltage rating from 50 to 1000 V AC and from 75 to 1500 V DC.
WEEE Directive 2002/96/EC
Notice to users concerning disposal of electrical and electronic equipment.
This product is labelled in accordance with the WEEE Directive (2002/96/EC) and its amendments concerning waste electrical and electronic equipment.
By assuring proper disposal you contribute to reduction of the risks of negative impact on humans and natural environment which otherwise may occur.
The symbol placed on the product or its documentation means that our product is not classified as household waste.
Return the device to a proper recycling point. You can contact your local authorities, a waste disposal service provider or the retail point where you purchased your product for more information about recycling.
RoHS Directive 2002/95/EC
Notice to users concerning reduction of hazardous substance contents in electrical and electronic equipment.
Out of our concern for protection of human life and a friendly environment we guarantee that our products controlled by the RoHS Directive on the use of hazardous substances in electrical and electronic equ-
ipment have been designed and manufactured in compliance with the RoHS Directive. We also guarantee that our products have been tested and proven not to contain hazardous substances at concentrations
which may negatively affect human health and/or the environment.
