GTV, ul. Przejazdowa 21, 05-800 Pruszków, tel. 22 444 75 00, fax 22 444 75 03, www.gtv.com.pl
INSTRUCTIONS FOR USE
CHARGER pop-up desktop power strip,
USB 5V 2A with a 1.5 m power supply cable
AE-BPW1U2UCH-80
outlet
AE-BPW1S2UCH-80
SCHUKO outlet
Isolate the mains (AC 220-240 V/ 50-60 Hz) before attempting to install the product.
Installation and servicing shall only be carried out by specialised electricians
licensed according to the local work safety regulations. Any technical modifications or non-compliance with the operation manual
shall void the product guarantee. When installing this product, always mind the safety of all nearby persons.
TECHNICAL SPECIFICATIONS:
1. Input voltage: AC 220-240 V
2. Protection class: I
3. Power supply cable: 1.5 m
4. Protection class IP20
5. Max. power: 3500 W
6. Max. current: 16 A
Basic information:
1. INSTALLATION
• Read and understand this manual before installing the pop-up desktop power strip.
Caution! For indoor use only.
Before connecting the power strip cord plug to a mains outlet, verify that the mains ratings meet the ratings specified on the product
packaging label. If the power strip cord is damaged, immediately and carefully unplug it from the mains. Do not use the power strip if
its power cord is damaged. Do not repair the power cord. Have it replaced by a licensed
and qualified person.
Keep the product away from unauthorized persons and children. The product is supplied with AC 220-240 V/50-60 Hz mains voltage.
Any unauthorized repair or modification of the product will void its warranty. Keep the product away from water or other electrically
conductive materials (including metal); otherwise a hazard of injury or death will occur. The cylindrical pop-up desktop power strip
with a mains outlet and two USB sockets is intended for direct installation in office furniture tops and kitchen tops.
2. ASSEMBLY
Before installing the product, make an installation opening in the desktop to accommodate the product. The hole diameter should
equal 10 cm (100 mm). With the installation opening ready, remove the mounting ring from the power strip by turning it anticloc-
kwise. Put the power strip in the installation opening (by passing the power cord through first), and align the position. Pass the
mounting ring
over the power cord and the power strip. Tighten the ring firmly (clockwise) against the underside of the installation surface. Plug the
power strip cord into a PE mains outlet.
3. USE
The power strip is ready to use after pressing the cover and opening it upwards up to the stop.
4. ADDITIONAL EQUIPMENT
Two USB power supply sockets for charging electronic devices – mobile phones, tablets,
photo cameras etc.
Caution: Charging may take place from both sockets simultaneously with 1 A current
or from only one socket with 2 A current.
Index
Model
Material
Type
Colour
Max. power
(W)
Max. current (A)
Net
weight
(kg)
Gross
weight
(kg)
EAN
AE-BPW1U2UCH-80 CHARGER
100 mm
plastic
PE outlet
Silver
3500
16
0,55
0,60
5901867196422
AE-BPW1S2UCH-80
SCHUKO outlet
5901867196439
AC
220-240 V
50-60 Hz
IP20
FRENCH
SCHUKO
USB 5V/2A
MAX
3500 W
100
mm
Ø
16 A
MAX
40
˚
C
MAX
1,5 m
PLASTIC
The product complies with the requirements of EU Directives and their transpositions into the national law. See the website at www.gtv.com.pl and the Declarations of Conformity for detailed information.
EN
