PWG-600 User Guide
- 52 -
Setting GSM parameters
GSM stands for “
Global System for Mobile Communication”
. You can set
parameters for using GSM as follows:
1. From the desktop, press the “Menu” key and select “Settings”. Press the
“Select” key to select the “Settings” menu.
2. Select “GSM Settings” and press the “Select” key. The following
submenus appear when you selected “GSM Settings”.
a.
GSM Service (On/Off)
: Select “On” to activate GSM service. Select
“Off“ to turn off GSM service.
b.
SIM Switch
: Two SIM cards are provided, namely, SIM 1 and SIM
2. Select the SIM card that you want to activate and press the
“Select” key.
Note: Only one SIM card can be active. The inactive SIM (even
though is in the phone) will not be able to make or receive
calls/SMS unless it is made active.
c.
Speaker Volume
: Select the “Speaker Volume” and press the
“Select” key to set the speaker volume. Select a volume level you
want and press the “Select” key. Ten volume levels are provided
ranging from “Level 1” to “Level 10”. Select “Off” to turn off the
speaker.
d.
Microphone Volume
: Select “Microphone Volume” and press the
“Select” key to set the microphone volume. Ten volume levels are
provided ranging from “Level 1” to “Level 10”. Select a volume level
you want to set and press the “Select” key.
e.
PIN lock SIM
: Sets the PIN authentication to “On” or “Off”. When
the PIN lock SIM is being turned “On”, where applicable the phone
will request for PIN authentication before the phone can continue
with other operations.
f.
Change SIM PIN
: Sets the PIN authentication password and where
applicable the phone will request for PIN authentication before the
phone can continue with other operations.
Caution: If the incorrect PIN number is entered for more than three
times, the SIM will be in a “lock” state and will need to be “unlock”
using a PUK (Personal Unlock Key). The PUK number can be
found on the registration details of the SIM card or alternatively you
can contact your GSM service provider for the PUK details.
