15
Trimmer fails to operate
1. Recharge battery.
2. Check switch. It will click if operating
correctly.
3. Blade is jammed.
Cutting blade will not cut
1. Blade is either worn or damaged.
2. Replace blade.
Blade will not move
1. Clean and lubricate blade.
2. Replace blade.
Cutting time has reduced
1. Use a lighter cutting action and cut in
several stages.
2. Fully discharge and recharge battery.
3. Clean and lubricate blade.
4. Replace blade.
Trimmer stops when cutting
1. Wait for automatic cut-out to
reset. Use a lighter cutting action.
2. Check blade and remove
any debris.
3. Charge battery.
LEDs show solid red
1. The hedge trimmer has jammed.
2. Check blade and remove any debris.
If this doesn’t solve your problem, don’t worry, we will help.
Go to
www.gtech.co.uk
or call
01905 345 891
Troubleshooting