manualshive.com logo in svg

Gtech eSCENT, Руководство по эксплуатации

Поделиться
Скачать
Gtech eSCENT Скачать руководство пользователя страница 25

25

Maintenance

Maintenance

In this section you will find a break down of adjustments and replaceable parts.  
To keep your eBike performing at its best you will need to regularly check these parts.  
Always use genuine replacement parts.

General maintenance

• 

Check the pressure and profile of the tyres.

• 

Check the brakes for wear and adjust or replace them if necessary.

• 

Check the wheels for buckles or damaged spokes and have them repaired immediately by a 
qualified bike repair specialist.

Cleaning

Clean your bike by removing dirt with a soft bristled brush and then washing with warm water. 
Regular cleaning of your bike will lengthen its lifespan. Be careful not to use too much water near the 
battery. After cleaning, dry your bike using a soft cloth. 

Never use a pressure washer, it could damage the electrics or bearings on your eBike.

Make sure that the battery is removed from the bike before fitting any parts.

Inflating the tyres .......................................................................... 26
Removing the front wheel ............................................................. 28
Removing the rear wheel .............................................................. 29
Replacing the inner tube ............................................................... 31
Splitting and replacing the chain ................................................... 34
Adjusting the rear derailleur ........................................................... 37
Attaching the front wheel .............................................................. 39
Attaching the rear wheel ............................................................... 40
Replacing the brake pads ............................................................. 42
Aligning the brakes ....................................................................... 44

Содержание eSCENT





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды