8
Changing the dust bag
:
ê
TURN OFF THE APPLIANCE AND UNPLUG THE POWER CORD
FROM THE SOCKET! Pull the plug only, not the cord.
The dust bag needs changing when the ‘bag full’ indicator light illuminates. Even if
the dust bag does not appear to be full at this stage, it should be changed. It
could be that a great deal of fine dust has blocked up the pores of the dust bag.
a
Turn off the appliance and unplug the power cord.
a
Open the bag cover by pushing the cover latch and lifting the cover.
a
To remove the dust bag, slide it out of the bag holder, by pulling the
cardboard of the dust bag upwards. Discard the bag.
a
To refit a new bag, push the cardboard support of a new bag fully into the
bag holder.
i
SPARE DUST BAGS (part number:CY-B1) CAN BE PURCHASED FROM
GTECH CUSTOMER SERVICES:
Tel; 0870 794 4001 Email; [email protected]
www.greytechnology.co.uk
i
USE ONLY SPARE PARTS AS SUPPLIED BY THE MANUFACTURER
Operation
ê
The dust bags are disposable. Once full, dispose of the bag and
replace with a new, clean bag. Do not re-use as blocked bags will
reduce the efficiency of the vacuum cleaner.
ê
The cover will not close without a bag being fitted, or if bag is not
fitted correctly.
