9
Maintenance
Your product requires very little care and maintenance. Simply clean the lens
regularly with a non-abrasive cleaner, we recommend the work light to be completely
discharged every one month and fully recharged again .Only store with a fully
charged battery and top-up the charge from time to time if stored for a long time (we
recommend the work light to be completely discharged every three month and fully
recharged again). Store in a dry and frost-free place, the ambient temperature should
not exceed 40°C.
Safety warning for work-Light
This is not a toy; children should not permit to use it. This is a DIY product, all
electronic parts fixed already, any intention of opening work-light or changing work-
light design is prohibitive unless a professional electrician.
Do not attempt to replace or change or the diode lights! If the protective glass is
cracked or broken, it must be replaced before the work light can be used again.
Troubleshooting
The product isn’t working
The battery may have cut out due to
excessive use to prevent overheating. Allow
the product to cool down before re-using.
The product is getting hot
During intensive use, this is normal, but it
is advisable to allow the product to cool
down regularly to prevent damage of the
motor.
The battery heats up during use
This is normal. Allow the battery to cool
down regularly to prevent damage of the
battery.
The battery and charger heat up
during charging
This is normal. It is advisable to remove
the battery from the charger once it is fully
charged.
4617_Flip_Light_manual_aw.indd 9
4617_Flip_Light_manual_aw.indd 9
28/10/2020 16:44
28/10/2020 16:44
