Gtech CFL001 Скачать руководство пользователя страница 7

7

Charging the battery

The state of charge of the battery can be 
tested by pressing the button. Three bars 
indicates a full charge, two bars a partial 
charge, one bar low charge.

WARNING:

Allow battery to cool down before 
charging if the battery is hot after 
continuous use. 

BATTERY 

All batteries wear out over time due to normal 
wear and tear. Do not attempt to disassemble 
and repair the battery, as this could cause 
serious burns especially when wearing rings 
and jewellery. For the longest possible battery 
life, we suggest the following: 

• Remove the battery from the charger once 

fully charged.

• Store the battery away from moisture and at 

a temperature below 80°F.

• Store the battery with at least a 30% – 50% 

charge.

• If a battery has been stored for six months or 

more, charge the battery as normal.

Battery state of charge indicator

To charge the battery, line up the slot of the 
battery with the slot of the charger and slide 
into place. 

The charger is sold separately.

The battery indicator light should turn from 
green to red when the battery is charging. 
When the indicator light has turned green the 
battery should be fully charged. 

4618_Flood_Light_manual_aw.indd   7

4618_Flood_Light_manual_aw.indd   7

28/10/2020   16:32

28/10/2020   16:32

Содержание CFL001













Отзывы: