
19
There’s no latch, the bin just pulls off.
It’s easier if you wiggle it as you pull it.
Remove the filter by pulling it from the top
of the bin. Tap the dirt from the filter and tip
any dirt from the filter housing. Wash the
filter if necessary.
Hold the Multi’s bin over a rubbish bin and
release the latch to empty the dirt. A gentle
tap will help. Remove the filter and tap off the
excess debris each time you empty the bin.
Wash the filter under a tap, squeeze it out
then let it
dry completely
before using it.
Recommended water temperature 40°C.
Do not use detergent or soaps. (You can
buy more at
www.gtech.co.uk
)
Never put the bin back without the filter
inside. You could damage the motor.
Cleaning the filter
Emptying the bin
2859_System_TE_manual_update_aw.indd 19
31/05/2018 13:24