background image

 

GTD-AMP8-R User Manual 

General guidelines 

 

Never open this fixture while in use. 

 

The fixture should be kept clean. 

DO NOT 

operate the fixture in extreme heat or dusty environments. Avoid contact 

with chemical liquid. 

 

This  fixture  is  a  professional  light  effect  designed  for 

INDOOR  /  DRY  LOCATIONS  ONLY

  on  stage,  in  nightclubs, 

theatres, etc. 

 

Maximum

 temp of the external surface 

140˚F (60˚C)

 

Maximum

 ambient temperature 

113˚F (45˚C)

 

Disconnect the fixture from power before changing any parts or accessories.   

 

The  fixture  is  only  intended  for  installation,  operation  and  maintenance  by  qualified  professional.  Instructions 

stated in the manual must be complied.   

 

Broken or damaged cables can only be fixed or changed by certified technicians, certified local distributors or the 

manufacturer to ensure operational safety.   

 

Do not modify the fixture or install other than GTD manufactured parts. 

 

For questions regarding safety operation, please contact our technical personnel or call the service h8620 
61808296. 

Packing and shipping 

Unpacking   

Notes 

All  products  are  quality  controlled  and checked  for  any  faults  before  they  are  dispatched  to  customers.  If  the  fixture  is 

damaged  during  delivery,  the  customer  must  notify  the  shipper  and  manufacturer  to  file  a  damage  insurance  claim. 
Photographic evidence of the damage must be provided.   

Cardboard box 

Open the box and take out the whole set of packaging foam which contains both the fixture and its accessories. Remove 
the foam from the top, put away the accessories, and then take out the fixture wrapped in the plastic bag. 

Packing after use

 

1.

 

Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the fixture for 
at least 5 minutes before packing. 

2.

 

Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories. Place the 
other set of packaging foam on top then carefully put it inside the cardboard box. 

Accessories 

Item 

Qty 

Unit 

Notes 

User Manual 

pc 

Power cable 

pc 

 

Notes 

Accessories are subject to change without any prior written notice. 

Содержание GTD-AMP8











Отзывы: