GTC REVPAD, Руководство пользователя

Страница: 54 / 91

GTC Sound Innovations REVPAD Manual
48
Setting Patch Favorites
You can configure your REVPAD Touchpad to provide three Patch Favorite sets. You can then switch from Patch to Patch by pressing a
Touchpad Control Button (or Control Button pair) and a designated area of the Touchpad.
Note: Because you will be looking at the Touchpad from above when it is attached to your guitar, the illustration shows the “guitar-
ist-eye-view.”
1. Choose the number of segments you wish to make active on the
Touchpad.
You can split the Touchpad into two, four, or six segments (
A
). Press the
SYS button and then navigate to the
Pad Setting
screen in System
Configuration. See “Pad Settings” on page 63 for more information.
2. Specify the behavior you want when invoking a favorite Patch set. While
still in
Pad Settings
, navigate to the
Favorite Mode Func
screen
and select one of two options:
■
Select Only
: After pressing a Touchpad segment to activate the
assigned Patch, the editing screen on the base unit continues to
display the Patch Favorite set. You may play using the selected Patch, but pressing the Touchpad will change the Patch. Press
the Touchpad Control Button again to remove the display.
■
Select and Play
makes the Patch selection immediately upon touching the desired segment and exits the mode.
3. Next assign a Patch Favorite layout to a Touchpad Control Button. Press the SYS button and then navigate to the Control Button
assignment screen in System Configuration. See “Touchpad Control Button Assignment” on page 65 for more information.
4. For this example, Control Button 1 of the Touchpad invokes FAV-1 (
B
), or Patch Favorite set 1, and the Touchpad is configured
for six segments. Press Control Button 1 to see the current assignments on the Editing Screen. Use the right arrow button to move
| 01D | 02A | 02B
| 01A | 01B | 01C
1
1 2
1 2
3
4
1
4
2
5
3
6
1
4
2
5
3
6
| 01D | 02A | 02B
| 01A | 01B | 01C
1