GTAKE GK600 Series, Руководство пользователя

Страница: 128 / 277

Chapter 6 Specification of Parameters GK600 User Manual
- 120 -
When A0-01 is set to „0‟ to display all parameters, only the parameters whose bit corresponding
to A1-20 and A1-21 is 1 can be displayed.
The parameters that correspond to bit 15 (the highest bit of binary system) ~ bit 0 (the lowest
bit of binary system) of A1-20 are shown as table 6-2.
Table 6-2
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8
E0 d6 d5 d4 d3 d2 d1 d0
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
C4 C3 C2 C1 C0 b2 b1 b0
The parameters that correspond to bit 15 (the highest bit of binary system) ~ bit 0 (the lowest
bit of binary system) of A1-21 are shown as follows:
Table 6-3
bit15 bit14 bit13 bit12 bit11 bit10 bit9 bit8
U2 U1 U0 L1 L0 H2 H1 H0
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
F6 F5 F4 F3 F2 F1 F0 E1

ATTENTION:
Parameters of Groups A0 and A1 are always displayed and are not subject to A1-20 and
A1-21 show/hide control.
Example:
Besides parameter Groups A0 and A1, the groups b0, b1, b2, C0, C1, C2, C3, d0, d1 and E1
are also requested to display, just set:
A1-20 to 037F (A1-20 is 0000 0011 0111 1111 in binary)
A1-21 to 0001 (A1-21 is 0000 0000 0000 0001 in binary)
Group b Run Parameter Setting
Group b0 Frequency Setting
Frequency setting is set by parameter Group b0. See Fig. 6-1 for logical relation of FREQ set.