STRING LIGHT CONSTRUCTION:
AA. Power Cord (Male End)
BB. Power Connection (Female End)
CC. Carabiner Clip
DD. Light Head
TO USE
1. Space out light heads (DD) and use carabiner clip (CC) to
hang each head where light is needed.
a. Do not use electrical cord to hang.
b. It is recommended to hang lights at approximately 10ft
height. Full 50ft string light with all 5 light heads mounted
at 10ft height illuminates approximately 75 linear feet.
c. Do not allow light heads to hang without being properly
mounted. All 5 light heads must be secure.
2. If desired, link additional 50ft strings by inserting male end
(AA) of additional string into connecting female end (BB) of
previous string. Up to 20 strings (100 lights/1000 feet) can
be linked on one outlet.
3. Continue steps 1 and 2 until all lights/strings are mounted
as desired.
4. Plug in power cord male end (AA) into outlet.
5. All lights will illuminate immediately.
6. Unplug lights from power when moving the light heads or
adjusting the carabiner clip.
TROUBLESHOOTING
Problem
Cause
Solution
Lights are not
lighting up.
No power or faulty
connection.
Check that all
connections are
secure, and power
is ON.
Other issue
-
Contact GT-Lite
Customer Service:
1-800-865-6799
CARE AND CLEANING
Your fixture is made from quality materials that will last an
extended period of time with proper care—including
periodically cleaning the surface of the fixture.
1. Use a mild, non-abrasive cleaner. Do not use any solvents
or harsh cleaning agents.
2. Use a soft, non-abrasive cloth.
3. Lightly spray cleaner onto the cloth. Do not spray liquid
cleaners directly onto LEDs, power cord, or any part of this
product.
4. Lightly wipe down fixture with damp cloth. Allow product to
dry completely before restoring power and using LED
lights.
AA
BB
CC
DD
