30306462 Issue 2.03
numbers (factory default is 27), it occupies one address.
Two activating methods when the sounder is in
Tone I:
Short external controlled input terminals S
and G to activate the sounder.
When the sounder occupies two addresses,
activate the first through the control panel.
Two activating methods when the sounder is in
Tone II:
When the sounder occupies one address,
activate it through the control panel.
When the sounder occupies two addresses,
activate the second through the control panel.
The wiring method of signal loop and power loop of the
sounder and the method of direct control through
volt-free normally open contact of the manual call point
are shown in Fig. 5.
Man
ua
l Call Po
in
t
Z2
D2
S
K1
Z1
Z2
K2
Z2
G
Z1
D1
GND
Z1
+24V
Sou
nd
er
Fig. 5
Sound Level Data (
Complies to EN54-3
)
Alarm
Angle
Horizontal
Vertical
20V
28V
20V
28V
15°
75.19
77.17
72.85
72.31
45°
84.01
87.07
82.57
85.63
75°
87.61
90.85
86.98
89.32
105°
87.43
90.22
88.42
90.67
135°
83.11
86.17
83.65
86.80
165°
70.60
73.84
75.55
77.98
Pre-alarm
Angle
Horizontal
Vertical
20
28V
20
28V
15°
72.67
75.73
61.15
65.11
45°
80.50
83.20
78.61
81.40
75°
84.37
87.25
83.56
86.53
105°
83.65
86.53
84.91
88.15
135°
79.51
82.57
80.32
83.65
165°
66.10
69.61
70.78
74.11
Specification
Operating Voltage
Loop voltage: 24V
Power voltage: 24VDC
Standby Current
Loop current
≤
1mA
Power current
≤
3mA
Action Current
Loop current
≤
5mA
Power current
≤
50mA
Wiring
Four-wire, connecting with
polarity-insensitive loop.
Polarity-insensitive two-wire
for connecting power.
Tone I
Sound Level:
See the above
sound level data table
Sound
Pattern:
2.8KHz
(430ms on /1200ms off)
Tone II
Sound Level:
See the above
sound level data table
Sound
Pattern:
2.8KHz
(430ms on /340ms off)
Programming Mode
Electronically addressed
Programming Range
Occupying 1 or 2 (when
device type is 121) address
within 1
～
242.
Ingress
Protection
Rating
IP33
Operating Temperature
-
10
℃～+
50
℃
Relative Humidity
≤
95%, non condensing
Material and Color of
Enclosure
ABS,
red
(PANTONE
1795C)
Dimension
(L
×
W
×
H)
ф 110mm
×
97.5mm (deep
base)
ф 110mm
×
83mm (shallow
base)
Mounting Hole Spacing
55mm
～
80mm
Weight
About 345g (deep base)
About 317g (shallow base)
Accessories and Tools
Model
Name
Remark
P-9910B
Hand
Held
Programmer
Supplied Separately
C-94DB
Base
Supplied Separately
Limited Warranty
GST
warrants that the product will be free from defects in
design, materials and workmanship during the warranty
period. This warranty shall not apply to any product that
is found to have been improperly installed or used in any
way not in accordance with the instructions supplied with
the product. Anybody, including the agents, distributors
or employees, is not in the position to amend the
contents of this warranty. Please contact your local
distributor for products not covered by this warranty.
GST China
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road,
QETDZ, Qinhuangdao, Hebei,
P. R. China 066004
Tel: +86 (0) 335 8502528
Fax: +86 (0) 335 8508942
[email protected]
www.gst.com.cn
GST UK
Global System Technology PLC
Lion Court, Staunton Harold Hall,
Melbourne Road, Ashby de la Zouch,
Leicestershire, England LE65 1RT
Tel: +44 1283 225 478
Fax: +44 1283 220 690
[email protected]
www.gst.uk.com
GST Dubai
Global System Technology PLC
PO Box 17998 Unit ZA04
JEBEL ALI Free Zone,
Dubai, UAE
Tel: +971 (0) 4 8833050
Fax: +971 (0) 4 8833053
[email protected]
www.gst.uk.com
This document is subject to change without notice. Please contact GST for more information or questions.
All manuals and user guides at all-guides.com
