30307213 Issue 1.02
Specification
Operating Voltage
Addressable Mode:
Loop voltage: 24V
Ranged: 16V~28V
Non-addressable Mode:
Voltage: 24VDC
Ranged: 20VDC~28VDC
Operating Current
Addressable Mode:
Standby current
≤ 2mA
Alarm current
≤ 3mA
Non-addressable Mode:
Standby current
≤ 13mA
Alarm current
≤ 23mA
Power-up Time
≤10s
Indicator
Red.
It
flashes
when
polling,
and
illuminates
steadily in alarm.
Programming Mode Electronic
programming.
Occupying
one
loop
address.
Address Range
1
～
242
Spectrum Response
Range
185nm
～
260nm
Detection Angle
Detection
Distance
※
25m for Level I, 17m for
Level II and 12m for Level
III.
Ingress Protection
IP66
Ambient
Temperature
－
20
℃～＋
60
℃
Relative Humidity
≤95%RH, non-condensing
Dimensions
147mm×106mm×92mm
Material and Color
ZL102 aluminum alloy,
silvery grey.
Weight
1.5kg
Installation Hole
Spacing
110mm×72mm
Explosion-proof
Mark
Ex d
Ⅱ
CT6
※
Test fire: The flame generated by 2000g of alcohol
in a container with bottom area 33cm×33cm and
height 5cm.
Accessories and Tools
Name and Model
Qty. Remarks
P-9910B Hand Held
Programmer
1
Order separately
Expansion Bolt M6×60
3
Screws M3×16
2
Maintenance
(1) The detector shall be cleaned at lease once a year
to ensure normal operation of the system.
(2) Before cleaning, notify the proper authorities that
the system is undergoing maintenance and will
temporarily be out of service. Disable the zone or
system
undergoing
maintenance
to
avoid
unwanted alarms.
(3) The detector shall be tested after being cleaned
and re-installed. After testing, notify the proper
authorities the system is back in operation.
Caution
(1) The detector should be handled with care during
storage, transportation, installation, commission
and maintenance to avoid damage from falling,
impact, outside force and friction .
(2) Installation and maintenance should strictly comply
with relative codes for explosive and hazardous
areas.
(3) Never open the cover for maintenance in field.
(4) The enclosure must be earthed.
(5) The following places are not suitable for the
detector:
Where flameless fire is to be expected.
Where intensive smoke spreads before flames.
Where the "view" of the detector is opt to be
obscured.
Where the sun can directly shine the detection
window.
Where there is strong UV light source in field,
like a tungsten halogen lamp.
Where open fire, welding, X rays, arc or sparks
may exist in normal condition.
Limited Warranty
GST warrants that the product will be free from defects
in design, materials and workmanship during the
warranty period. This warranty shall not apply to any
product that is found to have been improperly installed
or used in any way not in accordance with the
instructions supplied with the product. Anybody,
including the agents, distributors or employees, is not
in the position to amend the contents of this warranty.
Please contact your local distributor for products not
covered by this warranty.
This Data Sheet is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532
