manualshive.com logo in svg

GSS STC 816 R, Руководство по сборке

Поделиться
Скачать
GSS STC 816 R Скачать руководство пользователя страница 7

 

 

- 7 -

 

STC 816 R

2.4  t

eChniCal

 

data

 

The devices meet the following EU directives: 

 

2006/95/EC, 2004/108/EC, 2011/65/EU

 

The product fulfils the guidelines and standards for CE labelling (page 39).

 

Unless otherwise noted all values are specified as "typical".

 

General

Cassette slots:  .....................................................................................8
Admissible ambient temperature: .........................................

0 °C … +50 °C

 

Dimensions (W x H x D) [mm]:  ...................................... 483 x 410 x 302
Mounting dimensions (W x H x D) [mm]:  ...... 483 x 620 (14 HE/HU) x 302

incl. free space to replace the power supply

Weight (fully equipped): ..................................................... approx. 20 kg
LNB operating voltage: ................ +12 V / 

≤

1 A    total (short-circuit-proof)

Other operating voltage: ............ +12 V / 

≤

1   A total (not short-circuit-proof, 

use with appropriate external fuse only)

RS 232 socket: ... data interface for software update and remote maintenance

 

RF output collector

Frequency range: ........................................................... 45 … 860 MHz
Control range of each input: .............................0 … –25 dB (electronically)
Control range of each output: .............................0 … –6 dB (electronically)
Input, output impedance: ................................................................. 75 

Ω

 

Return loss: ...................................................................................14 dB
RF output: .................................................................................. F socket
Decoupling loss of the inputs: ..........................................................30 dB
Insertion loss (due to internal amplifier): ..............................................0 dB
Output level with 16 channels .......................................maximum 93 dBµV

 

Power supply

Mains voltage: .................................................... 220–240V~, 50/60 Hz
Power supplies (individually hot swappable): ...........................................2
Power consumption (fully equipped, incl. LNB power supply):  .......... 210 W

Содержание STC 816 R









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды