- 21 -
SMCIP 401 ASI
• Feed the SAT IF range, in which you would like to insert the "new" trans-
ponder, into the device via LNB input
9
.
• Connect a SAT IF spectrum measurement device to output
0
.
• Graph the spectrum which is present at the device output
0
with a measur-
ing instrument and adjust the output frequency of the "new" transponder to
the gap.
—> In order to get the receiving frequency which must be set, you have
to add the corresponding LNB oscillator frequency (e.g. 9750 MHz
low band, 10600 MHz high band) to the SAT IF frequency of the
transponder.