- 21 -
PTIS 1000
i
nPut
tr ansPort
strea m
In this menu you select the signal source for the selection of the services. The
transport streams to be processed are provided by "
Tuner A
", "
Tuner B
" and
the ASI interface "
ASI
".
Bx 4
Tuner A OK
INPUT
=>
• Press the
buttons to select the signal source of the input transport
stream ("
Tuner A
", "
Tuner B
", "
ASI
").
—> "
OK
" indicates that an input signal is present. If there is no input
signal available "
– –
" is displayed instead of "
OK
".
Input transport stream selected: "
ASI
"
• Press the
button.
—> The menu "Allocating IP addresses" – "
IP-OUT 1
" is activated (page 24).
Input transport stream selected: "
Tuner A
" or "
Tuner B
"
• Press the button.
—> The menu "Setting the input channel" – "
INPUT
" is activated.
s
et ting
the
inPut
Channel
Once the RF receiver has synchronised to the input signal, "
OK
" is displayed.
If "
– –
" appears in the second line of the display, there is no input signal
present. Check the configuration of the antenna system and the head-end sta-
tion as well as the preceding settings of the cassette.
Bx 4A
C60 (786.0)
INPUT
OK
• Use the
buttons to set the desired input channel.
—> Beside the input channel set the relevant input frequency is displayed.
• If necessary use the button to activate the menu item "Fine tuning".
Содержание PTIS 1000
Страница 1: ...Assembly Instruction PTIS 1000 ...
