GSS PSU 8-16 I, Инструкция по сборке

Страница: 14 / 37

- 14 - PSU 8-16 I
4.2 r
emove front Cover
2 2 1
Fig. 7
• Unscrew the locking screws
1
.
• Loosen the mounting screws 2 .
• Slide the front cover upwards and unhook it.
4.3 m
ountinG the head
-
end station
– Install the head-end station vibration-free.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
– To avoid too strong heating of the head-end stations it is not admissible
to mount them one upon the other without using thermic precautions (e.g.
permanently air recirculation, ventilation, heat deflectors etc.).
– Ensure that
- the mounting area can support the weight of the head-end station
- there is an adequate ventilation
- the permissible ambient temperature will be maintained
- the mounting position is dry and protected against splashing water.
—> For a complete disconnection from the mains, the mains plug must
be pulled out of the mains socket. Ensure that the mains plug can be
pulled out without difficulties.