GSS PHDT 1000 H, Инструкция по сборке

Страница: 9 / 48

- 9 - PHDT 1000 H
P
ay
tv
Here, for example, a pay TV service is offered. One line can provide up to
100 rooms with one program.
The service name can be set (e.g. "PAY_A").
The room number and the number can be entered for each line (e.g. room 1
number 100). The services 1...100 with the names "PAY_A 1"... "PAY_A 100"
are created from this.
The common pay program and a common "empty program" (e.g. with instruc-
tions for activation) are fed in via the ASI input.
You can choose between the two programs via UDP broadcast.
One cassette can generate two channels, i.e. operate up to 200 rooms (scal-
able).
C
ontrol via
udP
The following control commands are available:
Command Function
:part 0 Line A is selected (part 1 = line B)
:select 11955,27500,0x6D66 Service is selected (:select frequency, symbol rate, SID)
LNB Control
:lnb Hh 18V 22kHz without protocol
:lnb Vl 14V -
:lnb Hh,9750 LNB oscillator is set to 9750 MHz to calculate the input
frequency, otherwise automatically h=10600, l=9750
:lnb TAHh + Tone burst A
:lnb TBHh Tone burst B
:lnb D0Hh + DiSEqC
TM*
position 0
:lnb DFHh + DiSEqC
TM*
position 15
PayTV
:zimmer 45,PAY_A,1 switches PAY_A on for room 45
:zimmer 45,PAY_A,0 switches PAY_A off for room 45
:zimmeronly 45,PAY_A,1 only the entry for room 45 is created for a search run
:zimmeronly 45,PAY_A,0 reset ":zimmeronly 45,PAY_A,1"
Commands always start with ":" and are ended by "\n" ("\n" means Car-
riage Return <CR>).
Example: " :part 0\n :lnb D0Hh\n :select 11955,27500,0x6D66\n "
For line A , the LNB settings are set horizontally high to DiSEqC
TM*
position 0
with frequency 11955, symbol rate 27500 and SID 0x6D66 .
*DiSEqC™ is a trademark of EUTELSAT