GSS ME 200, Руководство по эксплуатации, Страница: 13 / 24

- 13 - ME 200
• Use button to change the sampling frequency.
• Press to pause the measuring process.
• Use button 1 to select a DiSEqC signal (N=off, position 1...4).
• Use button 2 to switch the 22kHz signal on/off.
• Use button 3 to switch the polarity (13V/18V).
• Press the OK key to start a search on the frequency
of the cursor line with a choice between Ku- and
C-band. A new satellite is created in the satellite list
(satellite setup).
sat setup
• Use buttons to select a satellite.
• Use button to activates the LNB setup
for the selected satellite.
• Button GOTO shows the transponder list
of the satellite and switches back to the
satellite list.
• Use button OK to activates a satellite or
transponder - depending on the list.
• Use button to add a new satellite.
• Use button to edit the settings for a satellite.
• Use button removes a satellite from the list<.
• Use button to start a channel search via the activated satellites/transpond-
ers (Scan).
—> Scan-Modes: Preset, Blind Scan, Network (NIT).
"All" or "only unscrambled" channels
"All", Digital TV or Radio