GSS HDTV 1000 ASI LAN, Руководство по сборке, Страница: 29 / 45

- 29 - HDTV 1000 ASI LAN / HDTV 1001 C
Ê UÊ *ÀiÃÃÊÌ iÊ button to return to the main menu.
If the input signal path “ A+B+ASI=1 ASI=2 ” is selected the station filter of
channel strip “ B ” is used in the channel strip “ A ”. Therefore perform the settings
for channel strip “ B »Ê>VVœÀ`ˆ˜}Ê̜ÊÌ iÊ«>}iÃÊÓÎÊÉÊÓ{]ÊLivœÀiÊ>V̈Û>̈˜}ÊÌ iÊ
“Setting the station filter” – “ PROGRAM ” menu.
If the input signal path “ A+ASI=1 B+ASI=2 ” or “ A+ASI=1 A+ASI=2 ” is se-
lected the channel strips can be programmed one after the other.
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the station filter” – “ PROGRAM ” menu is activated.
Setting the station filter
The default setting for the station filter is “ off ”. In this menu you define the sta-
tions received to be transmitted. If stations are activated the output symbol rate
increases.
If the station filter is switched off (factory default) all stations of the transport
stream passes the station filter. As soon as the station filter is activated all sta-
tions are inactive and can be added to the transport stream selectively.
The figure of the menu below is dependent on the setting of the “Selecting the
input signal path” menu (page 21).
The menu shows the setting ” A+B+ASI = 1 ASI = 2 ”.
With this setting the transport stream of channel strip “ B ” is routed to the trans-
port stream of channel strip “ A ” and therefore cannot be set in channel strip
“ B ”. Programming channel strip “ B ” the transport stream coming from the ASI
input can be processed only.