GSS HDMT 1000 ASI LAN, Руководство по сборке

Страница: 24 / 43

- 24 - HDMT 1000 ASI LAN / HDMT 1001 C
Ê UÊ *ÀiÃÃÊÌ iÊ button.
—> The “Setting the output channel” or “Setting the output frequency” –
“ OUTPUT ” menu is activated.
Setting the output channel
Ê ˜ÊÌ ˆÃʓi˜ÕÊޜÕÊÃiÌÊÌ iʜÕÌ«ÕÌÊV >˜˜iÊœvÊÌ iÊV >˜˜iÊÃÌÀˆ«Ê­-Ó£ÊoÊș®°Ê
Additionally the modulator of the channel strip can be switched off or on
(page 24).
Bx 4A
C21 OUTPUT
on
UÊ Use the buttons to set the output channel.
Setting the output frequency
In this menu you set the output frequency of the channel strip Ê­{Ó°äÊoÊnÈä°äÊâ® .
Additionally the modulator of the channel strip can be switched off or on
(page 24).
Bx 4A
474.00 MHz OUTPUT
on
UÊ 1ÃiÊÌ i buttons to place the cursor under the digit to be set for the
frequency display then use to set the output frequency wished.
Switching the modulator off or on
Bx 4A
C21 OUTPUT
on
Ê UÊ /œÊÃ܈ÌV ʜvvÊÌ iʓœ`Տ>̜ÀÊ«>ViÊÌ iÊVÕÀÜÀÊ՘`iÀʺ on ” using the button
and switch “ off ” the modulator of the channel strip using the buttons.
—> The status LED is switched off (see also page 15).
—> The switched off modulator is indicated by “ - - - “ in the display instead
of the channel or frequency display.
Ê UÊ ˜ÊÌ iÊV>ÃiÊÌ iʓœ`Տ>̜ÀʈÃÊÃ܈ÌV i`ʺ off ” use the to switch it “ on ”.