GSS HDMC 1000 C, Руководство по сборке

Страница: 26 / 44

- 26 - HDMC 1000 C
s
ymbol r ate
If "QAM…" modulation is selected, the setting for the symbol rate appears at
the right side.
Bx 4A /B
QAM256
INPUT
6900
• Use the buttons to position the cursor under the digit to be set for the
symbol rate then use to set the corresponding symbol rate.
• Press the button.
—> The menu "Input channel / Input frequency" – " INPUT " is activated.
i
nPut Channel
/ i
nPut frequenCy
In this menu you have to set the corresponding input channel / input frequency
for the transponder to be received.
Bx 4A /B
C55 746.00
INPUT
OK
• Use the buttons to position the cursor under the digit to be set for
the input channel / input frequency then use to set the desired input
channel / input frequency.
—> Once the RF receiver has synchronised to the input signal, "OK" is
displayed.
—> If "– –" appears in the second line of the display, there is no input
signal present. Check the configuration of the antenna system and
the head-end station as well as the preceding settings of the cas-
sette.
• Press the button.
—> The menu "Station filter " – " PROGRAM " is activated.