- 10 -
HDM 2380 P CI / HDM 2380 OIRT CI
3.6 Retrofitting a CA module
The cassette is equipped with a common interface. It allows you to connect a
CA module for various scrambling systems and service providers. Scrambled
channels can only be descrambled with a CA module suitable for the scram-
bling system and the corresponding smart card. The smart card contains all the
information for authorisation, descrambling and subscription.
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for descrambling several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
–
Any changes made by program providers to the structures in the program
data might impair or even prevent this function.
– When working with the CA module, please read the corresponding operat-
ing manual from the respective provider.
• Insert the smart card
1
into the CA module
2
so that the chip
3
on the
smart card faces the thicker side (top) of the CA module.
• Insert the CA module into the guide rails of the CA slot
4
with the top side
of the CA module facing the top side of the cassette.
• Push the CA module without canting into the guide rails of the CA slot
4
and contact it to the common interface.
3
4
1
2
