GSS HDE 164, Инструкция по сборке

Страница: 13 / 24

- 13 - HDE 164
5.2 p
rogr a mming the module
Notes:
– Entries are saved by pressing the button.
—> You will be returned to " Selecting the module/channel strip ".
– The programming process can be cancelled by pressing and holding the
button.
—> Changes will NOT be saved.
—> You will be returned to "
Selecting the module/channel strip ".
• Switch on the head-end station.
—> The display shows " SETUP BE160 " and the software version of the
head-end station (e.g. V 10).
—> The output level of the output collector can be adjusted in the
" SETUP " menu (see STC 160 assembly instructions).
Ein / On
SETUP
V 10
BE160
s
eleCting the module
/
Channel strip
• If necessary, press repeatedly to select the particular module ( Bx …)
to be programmed.
Bx 2
ASI 4xENCODER
V 3
……… ………
Bx 3
……… ………
………
/
—> The display shows e.g. the menu Bx 2 4xENCODER
ASI V 3 .
" Bx 2 " stands for slot 2
" 4xENCODER " type of module
" V 3 " software version of the module