GPS Trip Meter
GSR
1000B
5
www.gsrlasertools.com.au
WWW.GPSSPEED.COM.AU
AU
The odometric functions of the Trip Meter utilise GPS technology and, given good
satellite coverage, achieve greater than 99% accuracy. The number of satellites
currently tracked by the device is shown in the lower-right corner of the display;
while four is the minimum number required to obtain speed readings, seven to
ten is typical.
Reset Trip B
Resets trip counter B to zero.
Current Position
Displays the current lat/long. Press
Menu
to return to the menu.
Trip A Dir
Sets the direction of counter A. Press
Enter
to cycle between
Up
,
Down
or
Select
.
Select
enables the use of the
arrow keys
to change direction
from the main display.
Trip B Dir
Sets the direction of counter B.
Average Based On:
Set the counter on which to base
average speed. Press
Enter
to toggle.
Show Statistics
Display detailed trip information. Press
Menu
to return to the menu.
Preload Trips
Sets the starting trip values.
Setup
Displays the general setup menu.
Preload Trip A
Set the starting value of Trip A.
Preload Trip B
Set the starting value of Trip B.
Reset A…
Sets the action to take when Trip A is reset.
Press
Enter
to toggle. “
preloads”
will cause
Trip B to reset to its preloaded value; “
leaves”
will leave Trip B at its current value.
Main Menu
Preload Trips
